Sentence examples for block height from inspiring English sources

The toe weight block height should be at least larger than 0.19 times the dam height.

But the toe weight block height should not be larger than 0.3 times the dam height.

The SCOF and DCOF values tended to decrease with increase in the rubber block height and orientation angle.

The results showed that two factors with the most effect on wind pressure difference were urban block height and widths of adjunct roads.

Numerical experiments have been carried out for different values of jet Reynolds number, channel height, slot width, spacing between blocks, block height, and block thermal conductivity.

Keeping the dissipation block height constant, water depth was varied to achieve three different relative block heights to simulate the tidal fluctuations in the coastal environment.

The methodwas the same as that described in Experiment 1, except for the items, which in this case consisted of wooden blocks (height, 4 cm).

Using the Electrostatics module from the AC/DC selection, a block of height (h 1 + h) was defined to be gas, ε g = 1, and an upper block of height (h 2−h) was defined as a liquid with a relative permittivity of ε L. This gave a total height of h 1  + h 2 = 55 mm: the distance between the casing and tool.

The few experiments that have been conducted on erosion by plucking highlight the importance of block protrusion height above the river bed, and the dominance of block sliding and toppling at knickpoints.

Each block's height is drawn randomly from the uniform distribution ranging from 20 to 60 meters.

where C D  ≈ 0.8, C S  ≈ 0.003 are the dimensionless front drag and skin friction coefficients, respectively, and L, D, and W are, respectively, the block length, height, and width (Fig. 12).