Sentence examples for block compressive strength from inspiring English sources

The results indicated that block compressive strength, water absorption and durability (1-min abrasion test) were within the recommended levels at the optimum stabilizer percentages.

The WRPC samples prepared at the heating temperature of 1,270 °C meet the Standards for Japan Interlocking Block Pavement Engineering Association (compressive strength > 3 MPa, water absorption > 70%).

After preparing appropriate cores from the blocks, uniaxial compressive strength test was performed on rock cores.

The tests were conducted on a cement block with medium compressive strength (5.5 6.9 kPa or 8000 10,000 psi) of 0.9 m (3 ft) width, 0.9 m (3 ft) length and 1.5 m (5 ft) height.

This figure demonstrates that the addition of 2 or 5 % HOFA in cement mortar has no significant difference in strength compared to the reference block; but the compressive strength significant decrease in the addition of 10 and 20%% of HOFA with mortar.

The obtained composite biomaterial blocks have a compressive strength of up to 140 MPa and elasticity module of up to 10 GPa.

The stabilized/solidified blocks were evaluated in terms of unconfined compressive strength, block density and leaching of heavy metals.

The results satisfied the relevant Chinese Standard, and the block has a high compressive strength and reliable insulation performance comparing with fired common brick or other hollow blocks.

Since the contact between blocks strongly influences the compressive strength, it is insufficient to consider single block strengths.

With respect to compressive strength, block units and cubes with different edge lengths, under various contact states were tested.

Heat curing at low temperatures induces chemical changes in the binder which stiffen the block and afford them a compressive strength which can be compared to existing blocks and bricks.