Sentence examples for blends indicated the from inspiring English sources

Dynamic rheology of some of the uncured blends indicated the physical gel-like behaviour due to the presence of small crystallites acting as physical crosslinks.

The single composition-dependent Tgs of the blends and the melting temperature (Tm) depression of sPS in the blends indicated the miscible characteristic of the blend system at all compositions.

Upon exposure to the vapors of nitrobenzene, the 5 wt.% BPy-POSS blend shows the similar quenching efficiency as 100 wt.% BPy-POSS blends, indicating the better excimer dispersion for vapor permeability of blend thin-films.

The miscibility window found in both cases is narrower for the blocky ACA blends, indicating the influence of the comonomer sequence distribution.

Positive Tg deviations from the ideal (linear) behaviour and changes in FTIR spectra of the blends indicate the presence of significant specific interactions between the two polymers.

Master curves for the dynamic shear responses, G′ and G″, are successfully constructed for both the pure materials and the blends, indicating the validity of the time temperature superposition principle for these systems.

However, in pure cellulose/PEO blend each negative magnitude of the values was much larger than the sum of the values of each parameter for the 23MC/PEO and 6MC/PEO blends, indicating the presence of secondary polymer-polymer interaction.

At a 1 4 ratio of a mixture of compounds 1 and 2, an additional set of peaks that match those of 2 form B are observed in addition to those of the blend, indicating the formation of an additional, separate network of 2 at high concentrations of the gelator.

Visual inspection of the SEM images of the blends indicated that the guest particles adhered to the surface of paracetamol resulting in effective formation of interactive mixtures.

The morphology of the blends indicated that the EPDM phase was preferentially dispersed as domains in the continuous Sorona® matrix up to 30% of its concentration.

SEM studies of cryogenically fractured surfaces indicated a decrease in dispersed phase domain size with the addition of the ionomer, while the impact fractured surfaces of PA6/EVA blends indicated extensive deformation with the formation of rumples indicating increased interfacial adhesion as compared to PA6/EVA blends.