Sentence examples for blends in order from inspiring English sources
Different supplementary cementing materials (SCMs) were used in Portland-limestone cement (PLC) blends in order to achieve sulfate resistance.
Compatibilization is the modification of the interface in immiscible polymer blends in order to refine and stabilize their phase structure.
In "Optimization studies" some optimization studies are presented for specifying the optimum jet fuel blends in order to satisfy specific targets for the freeze point and viscosity of the blend.
We find that biodiesel blending will need to increase dramatically within a short period of time (i.e., by 2016 all diesel fuel would need to be 20% blends) in order to generate enough LCFS credits.
This study aims to investigate the thermal degradation behavior and the kinetic parameters of biomass/sorbent blends in order to establish the mixing ratio that results in higher conversion efficiency during gasification.
Another area of interest requiring further research is the continued modification of the blending by altering the percentages of each component used as well as adding different materials into the blends in order to reach the optimum properties for other applications.
This is where each component in the blend is roasted at different temperatures and for different durations before being blended, in order to bring each one to perfection.
Whiskeys are blended in order to achieve a uniform product with a balanced character and, generally, a lighter, somewhat less pronounced taste than that of straight whiskey.
Electrospinning was used to fabricate a miscible polycaprolactone (PCL /polyglycolide (PGA) fiber blend in order to increase the interfacial bonding of the fibers to a PCL matrix.
Enabling one to use two simple formulae to determine, for a given fuel with known RON and MON, the volume fractions of toluene, n-heptane and iso-octane to be blended in order to emulate that fuel.
The time temperature superposition principle was applied for the FKM/ACM and 20% LCP filled FKM/ACM blend in order to evaluate the changes in the viscoelastic properties of FKM/ACM blend by the addition of LCP.
