Sentence examples for blends at room from inspiring English sources

Aging of the blends at room temperature for several months induced partial phase separation in the material.

Dr Snaith's perovskite can be blended at room temperature.

The second heating thermogram of PLA/P1-20 ated at 35 °C differs neither from that of the blend aged at room temperature nor from that of the unaged blend.

It can be seen that the first heating thermogram of the blend aged at 35 °C differs from that of the blend aged at room temperature only above 50 °C, where the melting of the crystalline phase occurs.

Raman study showed that the ionic association of the highly concentrated blend electrolytes at room temperature is not significant.

Based on the Painter Coleman Association Model (PCAM), a value for inter-association, KC=300 is obtained in PVPh-b-PMMA/PEO blend system at room temperature.

As a comparison, the tensile strength (σm) and εb of the PBA/CO2-WPU blending film at room temperature was only 4.4 MPa and 383% when PBA loading was 50 wt%, while the PBA/CO2-WPU multi-phase film showed σm of 18.8 MPa and εb of 489%, respectively.

Ingredients were blended thoroughly at room temperature and stored in dark containers at 4°C.

Make sure your blend is at room temperature before adding to its containers.

In crystalline polymeramorphous polymer blends the crystalline component crystallizes out, however low its concentration in the blend, if the blends are left at room temperature for months/years after its preparation, provided the diffusion is permissible at room temperature.

Injection-moulded specimens of polyethylene/polypropylene blends were drawn at room temperature and subsequently annealed at 140°C, i.e. above the melting temperature of polyethylene, but below the melting temperature of isotactic polypropylene.