Sentence examples for blending ratios of from inspiring English sources
According to the types and blending ratios of constituting active materials, there can be numerous combinations of blended-electrodes, resulting in different performance characteristics.
Specifically, the ignition delays of the stoichiometric blend+air mixtures were measured at elevated pressures of PC = 15 bar and 30 bar, compressed temperatures of TC = 626 944 K, and varying blending ratios of the constituents.
In this study, ignition delay times of ethanol/DME/'air' mixtures with blending ratios of 100% EtOH, 70%/30% EtOH/DME and 50%/50% EtOH/DME mixtures were measured in a rapid compression machine and in two high-pressure shock tubes at conditions relevant to internal combustion engines (20 40 atm, 650 1250 K and equivalences ratios of 0.5 2.0).
It was dependent on blending ratios of CS and incorporation ratios of FA.
The mixture proportion with water to binder ratio (W/B) of 0.25 only consisted of various blending ratios of CS versus sea sand (SS) such as 0, 30, 50, 70 and 100%% respectively.
Therefore in this study it was investigated that the practical use of high performance concrete with various blending ratios of both crushed aggregate and natural sea aggregate produced in Korea (Park 1998; Kim and Lee 1995; Chi et al. 2006).
Optimal blending ratio of high coking Moolarben coal as a blended fuel of pulverized coal fired plant was investigated by 100 kg/h test furnace through blending with design coal, Energyman bituminous coal.
We also optimised the blending ratio between each pair of frames, setting different blending ratios in areas of the image with high (foreground, moving areas, blending ratio of 0.9) or low (background static areas, blending ratio of 0.1) optical flow.
Related regulations stipulate that the waste blending ratio of recycling green building materials should be higher than 50%.
The fiber blending ratio of the filling resistant 3D fabric had a prominent influence on the static-bursting strength.
The beaded fiber mats were fabricated using electrospinning technique by controlling the solution concentration, weight blending ratio of Thai silk fibroin/gelatin blend, and applied voltage.
