Sentence examples for blend in order from inspiring English sources
Electrospinning was used to fabricate a miscible polycaprolactone (PCL /polyglycolide (PGA) fiber blend in order to increase the interfacial bonding of the fibers to a PCL matrix.
The time temperature superposition principle was applied for the FKM/ACM and 20% LCP filled FKM/ACM blend in order to evaluate the changes in the viscoelastic properties of FKM/ACM blend by the addition of LCP.
Our analysis suggests that the lateral crystal/melt interface thickness should increase with PVFZ concentration in the blend in order to minimize the demixing of a crystallizable chain as it diffuses into the melt/crystal interface to become physically adsorbed onto the crystal growth front.
However, the cyclic-fatigue behaviour of epoxy polymers has not been studied in great detail, especially for epoxy polymers where the material has been modified by forming a polymer blend in order to increase its toughness under quasi-static test rates or impact test rates.
The intention was to develop a formulation that uses very low levels of metformin in combination with the resveratrol-HMB blend in order to lower the effective dose of metformin required for management of diabetes.
This is where each component in the blend is roasted at different temperatures and for different durations before being blended, in order to bring each one to perfection.
Whiskeys are blended in order to achieve a uniform product with a balanced character and, generally, a lighter, somewhat less pronounced taste than that of straight whiskey.
Different supplementary cementing materials (SCMs) were used in Portland-limestone cement (PLC) blends in order to achieve sulfate resistance.
Compatibilization is the modification of the interface in immiscible polymer blends in order to refine and stabilize their phase structure.
In "Optimization studies" some optimization studies are presented for specifying the optimum jet fuel blends in order to satisfy specific targets for the freeze point and viscosity of the blend.
We find that biodiesel blending will need to increase dramatically within a short period of time (i.e., by 2016 all diesel fuel would need to be 20% blends) in order to generate enough LCFS credits.
