Sentence examples for bleaching time from inspiring English sources

Effect of bleaching time and temperature on the radicular penetration of hydrogen peroxide.

Further, the coloring and bleaching time decreases with increasing total pressure, coloring being faster than bleaching.

The coloration and bleaching time are also shortened from 13.4 s and 8.9 s for PANI: PSS to 8.3 s and 7.6 s for PANI-Au-c, respectively.

It has previously been reported that commercially available fluorescent probes such as Alexa Fluor 647, polyacrylonitrile beads and carbon dots have a short bleaching time which limits their application for long term bioimaging studies during the course of an experiment21.

A typical device presented a coloration time of ≈30 s and a shorter (<10 s) bleaching time, with ΔOD=0.4 at 2.23 eV (human eye maximum sensitivity), falling to 0.25 after 2·104 cycles.

With 4 wt.% GO-PPD feeding, the optical contrast was enhanced by 36% from 0.38 for PANI/PSS to 0.52 for rGO-PANI-3, while the coloration time was almost same as that of PANI/PSS and the bleaching time was decreased by ∼20% from 9.1s for PANI/PSS to 7.4s for rGO-PANI-3.

The decrease of coloration and bleaching times reached 30%and50%0%, respectively.

Coloring (transmittance change of 97 70% at 700 nm) and bleaching times for PV films are 0.26 and 0.77 s, respectively.

The coloring and bleaching times of the EC device are approximately 1 min under normal operating conditions (±1 V).

At the practically identical optical contrast both coloration and bleaching times decreased that can be explained by the composite film morphology.

The mesoporous NiO nanowall arrays show a transmittance variation with 77% at 550 nm, and the coloration and bleaching times are 2 s and 2.5 s, respectively.