Sentence examples for blanket thickness from inspiring English sources

The most critical free parameter in this stage is the blanket thickness, as a function of the 6Li enrichment.

There are many options to be considered in the engine design including target yield, U-to-C ratio in the fuel, fission blanket thickness, etc.

Spectral shifter and reflector are utilized to improve the blanket shielding capability and energy multiplication, and to reduce the radial blanket thickness.

The aim of the analysis was to minimize the radial blanket thickness, while ensuring tritium self-sufficiency and to assess the shielding performance of the reactor in terms of the radiation loads to the super-conducting toroidal field (TF) coils.

The result indicated that, under the constraint of the blanket thickness being less than 0.5 m, the mixture of Li2O pebbles and Be12Ti ones is the most effective and that the TBR is expected to be greater than 1.05.

This permits an estimate to be made with ease of the blanket thickness that is necessary to reduce the intensity of the diffraction radiation to levels that are comparable to the background acoustic radiation produced directly by the turbulence quadrupole sources in the boundary layer.

The parameter study considered 198 different blanket compositions for three blanket thicknesses.

With regard to the shielding performance it was found that the design limits for the radiation loads to the TF-coil can be met with radial blanket thicknesses of 75 cm, 60 cm and 55 cm utilizing a two-component shield of Eurofer steel and tungsten carbide between the breeder zone and the vacuum vessel.

The following parameters affecting the global TBR were investigated: TBR poloidal distribution, radial breeder zone depth, 6Li enrichment, steel content in the breeder modules, poloidal segmentation of the breeder blanket volume, size of gaps between blankets, thickness of the first wall and of the tungsten armour.

Then all points at distance ε from the surface on both sides create a blanket whose thickness is 2 ε.

To imitate the slow rate of heat exchange between the CPB and rock mass in a stope (Wang and Fall 2014), a glass wool blanket with a thickness of 50 mm was used to cover the cylinder mold.