Sentence examples for blank force from inspiring English sources

She is a blank force largely ignorable until the final moments, when she is called upon to deliver the series's firing line: "Your work of art didn't work for us".

The blank force is supplied by both the matrix blank and the punch blank.

In addition, the simulated motion at the entrance of the matrix is shown in Fig. 8a c so that (a) shows the primary blank force loading, (b) shows the secondary blank force loading, and (c) illustrates the unloading and the appearance of the springback.

During moving the punch in the matrix, the sheet feeders conduct the sheet into the mouth of the channel matrix by controlling the sheet velocity, and at this stage, the blank force is reached to its maximum value.  .

According to simulating process, the blank force is changed from 30,000 to 350,000 N by entering the punch in the mouth of the matrix as much as 30 mm.

Accordingly, the primary blank holder force is computed as the force value that causes to lock the plate between the matrix and blank, and the secondary blank force is also estimated to be the maximum blank holder force.

Also, the primary and secondary blank forces are obtained using trial and error by design and construction of PLC system to control the speed of the punch relative to the velocity of movement of the plate holder jaw carriage.

In the present investigation, mathematical relationship describing the fracture zone depth, the fracture angle and the blanking force are proposed.

The fine blanking technology of cam were analyzed, its blank layout was designed, the fine blanking force was calculated and stamping equipment selected, the fine blanking die clearance and rounded edge were determined.

The blanking of electrically heated engineering materials is simulated using the commercially available software, ABAQUS: the temperature distribution, the "thermal" punch force and the blanking force for different heating conditions are investigated.

The aim was to study the effects of the interaction between the clearance, the wear state of the tool and the sheet metal thickness on the evolution of the blanking force and the geometry of the sheared profile.