Sentence examples for blank carbon from inspiring English sources

Fig. 1 Cyclic voltammogram behavior of 5-FU, phosphate buffer (pH = 7, I = 0.2 M), (a) blank carbon paste electrode, and (b) carbon paste electrode 1.0 × 10−4 M; 5-FU scan rate: 50 mVs−1; accumulation time: 120 s (at open circuit).

Carbon blanks have been measured at low 10−16.

The carbon-blank sample that is obtained by designating the mass ratio of polyvinyl chloride and Mg(OH 2 as 1 2 at the carbonization temperature of 700 °C is amorphous and highly porous in essence.

Table 2 Average sheet hall coefficient Sample Average sheet hall coefficient (cm2 C−1) Dominant carrier Bond paper blank 2.76E + 09 P Carbon cloth −3.24 N CNT paper −1.383 N CNT paper + Pt 1.372 P. The CNT paper sample switched from n- to p-type carrier upon deposition of the Pt, indicating that electron conduction changed to hole conduction upon deposition of the Pt.

Blanks produced a residual solvent carbon mass of 10 20 μg following evaporation and were measured for radiocarbon on the Australian National Tandem for Applied Research ANTARESS) accelerator (Fink et al., 2004), which provides greater accuracy for samples less than 50 μg carbon.

We adjusted organic carbon measurements for field blanks to estimate OCM.

The difference between the amounts of FeSO4 added for the samples compared to that added to the blank titration determines the amount of combusted carbon.

The deformations during forming of carbon UD/PEEK and glass 8HS/PPS blanks with a quasi-isotropic lay-up were analysed.

This part of AEP's site plan is literally a blank space, reserved for some future day when carbon dioxide emissions might be regulated.

Cyclovoltammetric (CV) measurements of powdered carbon electrodes were carried out for blank electrolyte solution (0.1 M Na2SO4) and with different concentrations of 4-CP.

The untreated activated carbon (GAC pure) was used for blank experiment.