Sentence examples for blade were measured from inspiring English sources

The convex and concave surface pressures of each blade were measured at 17 tapping points using 1.5-mm outer diameter and 10-mm-long copper tubes which were press fitted into 17 tapping holes.

The pressure distribution around the concave and convex surfaces of each blade was measured experimentally using a semi-cylindrical three-bladed Savonius VAWT model with overlap distance, a = 25 mm, between the adjacent blades as shown in Figure 2.

The vibration response of the blade is measured using either piezoceramic sensor patches bonded to the blade, or a scanning laser doppler vibrometer.

Pressure acting on the surface of rotor blade is measured during rotation by multiport pressure devices and transmitted to a stationary system through wireless LAN.

Both, angle resolved and angle averaged flow fields near the impeller blades were measured.

Secondly, pressures acting on the surface of rotor blades were measured during rotation by multiport pressure devices.

Angle resolved and angle averaged flow fields near the impeller blades were measured and the structure of trailing vortices was studied in detail.

The force demands when cutting wood with chromium-coated steel, lacquered steel and polytetrafluoroethylene (PTFE -coated loPTFE -coated blopperwere meandred.

Phase-averaged and phase-resolved flow fields near the impeller blades were measured and the structure of trailing vortices was studied in detail.

Unsteady flow in axial fans with circumferential skewed blades were measured at off-design conditions using a hot-wire test, to investigate the effect of sweep on aerodynamic limit and aeroacoustic sound source.

The length and width of blades were measured.