Sentence examples for blade using a from inspiring English sources

Here we have optimized shape and location of cooling passages of a C3X turbine blade using a multi-objective strategy.

The scenario of this work is divided into two sections; the first one is the numerical analysis for the conventional Savonius with fully optimizing for the shape of the blade using a genetic algorithm.

Shear force, perpendicular to the axis of muscle fibers, was carried out by cutting at the second segment of the shrimp abdomen with Warner-Bratzler blade using a crosshead speed at 2 mm·sec−1 and a 25-kg load cell.

Tissue samples were collected along the minor veins near leaf apex, then fixed for 30 minutes at room temperature in a 0.1 M phosphate buffer (pH 7.0) containing 1% glutaraldehyde, and embedded in 7% low melting-point agarose and sectioned (100 µm thick) transversally with a razor blade using a vibratome (Series 1500 Leica St . Louis MO).

Transverse sections of developing rice grain (1 mm thick) were cut with a clean double-sided razor blade, using a sliding motion to avoid crushing the seed, and fixed for 48 h in 4 % (v/v) paraformaldehyde and 2·5%% (v/v) glutaraldehyde in phosphate-buffered saline at pH 7·2.

If you don't want to sharpen your blade by hand with a file or there are minor dents or cracks in the blade, using a mechanical solution may be necessary.

After fixation and dehydration, 70-nm sections were prepared with a diamond blade, using an ultramicrotome (ULTRACUT UCT; Leica) and mounted on metal grids.

Unlike rectilinear k-space sampling, BLADE uses a turbo spin echo (TSE) sequence to acquire multiple echo trains (BLADEs) in a rotating, partially overlapping fashion (Fig. 1).

In this study we numerically examine the aerodynamically generated added-mass and damping effects on the blades using a quasi-static blade-element method and an unsteady boundary-element method.

The aim of this paper is to explore multi-dimensional small wind turbine blade optimization including structure, by designing hollow blades using (a) traditional E-glass and polyester; (b) flax and polyester; (c) a strong, rapid prototyping material; and (d) solid blades using timber.

All dissections used miniature scalpel blades manually formed from single edge razor blades using a blade breaker (George Tiemann & Co., Hauppauge, New York #160-346).