The Hodson Dominy blade has been used as an example to show the ability of this blade-design method to remove leading-edge separation bubbles in gas turbine blades and other airfoil shapes that have very sharp changes in curvature near the leading edge.
The doctor blade method was used to spread the TiO2 paste on the compact layer in order to form the mesoporous network of TiO2.
Figure 4 demonstrates a compact doctor blade coater (Fig. 4a) along with an application example where the doctor blade method is used to coat the resin in R2R NIL for the fabrication of flexible metastructures comprising microscale dot array with various diameters (Fig. 4b, c) [7].
CuS counter electrode was prepared using a doctor-blade method according to the literature [29] with a fluorine-doped tin oxide (FTO) glass as substrates.
The present work presents a rotor blade design and optimization method to address the blade structural strength design problem.
EPD process is suggested to be efficient for fabrication of positive electrode under the predicted optimal condition in accordance to the positive electrode prepared by Doctor blade method.
For the first time, we demonstrate cost-effective novel carbon nanotube (CNT) paste that was applied to FTO substrate by the facile doctor blade method and processed at low temperature (100 °C).
The resulting paste was then used to fabricate the working electrode using the well-known doctor blade method as reported in [25].
The shear bond testing was with the help of a loop wire because Mojtahedzadeh et al. [24] in their study mentioned that the loop wire method has more similarity to clinical loads and lower dispersion of values than the blade method, for debonding of brackets in a shear mode.
