Sentence examples for bitumen filling from inspiring English sources

However, its influence on dolograinstones was negligible as dissolution in relation to thermochemical sulfate reduction (TSR) reaction occurred during paleo-oil cracking into gas, thereby increasing intergrain porosity and effectively offsetting porosity decrease caused by bitumen filling.

The T1f gas reservoirs evolved from a paleo-oil accumulation as evidenced by pore-filling bitumen, which had negative effects on crystalline dolostones by filling intercrystal pores.

Afterwards, the authors proposed a detailed characterization of two types of fillers and the critical filler concentration, introduced by Faheem and Bahia, was used to calculate the minimum amount of bitumen for maintaining the mastic in a diluted state and filling the voids in the mixtures.

Fractures related to overpressure are usually tensional veins filled with bitumen or calcite (Fig. 6d).

Cylindrical SMA specimens were prepared in SGC and their dimensions and weights were measured to calculate the volumetric properties like bulk specific gravity (G MB), air voids (V A), voids in mineral aggregates (VMA) and voids filled with bitumen (VFB).

Highly abundant stylolites filled with residual bitumen and precipitated cements in the cap rock intervals consistently have low poroperm values, resulting in micropore occlusion and occlusion of the late hydrocarbon migration pathways, which can act as barriers for the upward migration of oil-gas.

Some of them are filled with calcite, quartz, and bitumen.

Last year a pilot project for Boreal at IISD-ELA spilled bitumen into three land-based outdoor tanks filled with lake water and sediment.

Additionally, effects of two important variables (WCA ratio and bitumen ratio) on Marshall Stability (MS), on air void content (AVC) and on voids of filled with asphalt cement (VFA) were modelled.

With the help of capillarity, the rejuvenator filled the cracks with a movement speed mainly determined by the volume of microcapsules in bitumen.

Waste composite poly-methyl methacrylate filled with a fine dispersion aluminium trihydrate (PMMA/ATH) and Fischer Tropsch wax were used as modifying agents for a 70/100 paving grade bitumen employed for road paving.