Sentence examples for bite depth from inspiring English sources
Average bite depth, mm/rev.
The noise dose to bite depth relationships are very similar to the relationship of specific energy and bite depth (Fig. 1).
Intake rate, bite mass, and bite area increased, whereas bite depth decreased as RF decreased.
Drilling at a bite depth higher than the maximum bite depth could result in excessive rubbing actions between the bit body and rock, and in low energy efficiency and high noise (Luo et al. 2014).
The testing results also show smallest D50's for drilling at 5.00 mm/rev (0.20 in/rev) bite depth.
Table 1 shows the controlled drilling rates and the resulting bite depths.
The preliminary results show that the size distributions of respirable dust were different when controlling drilling in different bite depths.
The rate combinations that result in bite depths either impractically too low or too high are not tested.
The drilling control is realized by varying the penetration and rotational rates to achieve desired bite depths in the experiments.
Blast tests were designed and conducted on window specimens with different frame bite depths, fixed or sliding boundaries and different interlayer anchorages.
