Sentence examples for bit detection from inspiring English sources

The corresponding energy consumption is 33 pJ per bit detection.

This means that the generation of the clk_lz clock signal is triggered at each start bit detection.

Indeed, from the results, we note that the clock signal clk_lz is triggered at the start bit detection of the received data frame.

LORD and T-LORD are particularly suited for hardware, parallel implementation and soft-output bit detection, and perform very well in combination with soft decoders like SOVA [25] or BCJR [26] for convolutional codes, or with an LDPC decoder [27].

In the simulation, for the unreliable bit detection threshold, we use the values listed in Table 2 under different transmit powers on the channel between the sources and the destination.

The "unreliable bits detection (UBD)" block uses the confidence information to detect unreliable bits in the received packet.

It's a remarkable, and slightly unlikely bit of detection, though no more unbelievable than that "green ears" deduction back in season one.

One possibility to implement such functionality is to use a protocol like UDP Lite [11], employing a partial checksum for bit error detection.

The design process requires only a single wire for its formulation without an increase in number of garbage outputs and provides full fault coverage under single bit fault detection with lesser design complexity.

Many communication systems use the cyclic redundancy code (CRC) technique for protecting key data fields from transmission errors by enabling both single-bit error correction and multi-bit error detection.

The beacon message has two additional bits to indicate these two statuses for each locator: (i) detection bit: this bit will be set to 1 if the locator detects the message abnormality through beacon message exchanges; otherwise, this bit will be 0;   (ii) type bit: this bit will be 1 if the locator detects itself under a duplex wormhole attack; otherwise, this bit will be 0.  .