Sentence examples for binder fraction from inspiring English sources

Further, the effect of binder mechanical properties and the binder fraction on the stress evolution in Si particles and at the binder/particle interface was calculated.

The proposed model, although simple, can guide a battery design engineer to choose a proper binder, charge/discharge strategy, and binder fraction for a durable electrode design.

This study validated the feasibility of staged extraction by addressing the concerns over solvent effects on testing results, potential selective dissolution of binder fraction by the solvent, desirable solvent selection and binder homogeneity of raw RAP and RAS materials.

Then by fitting experimental data, mathematical models to predict gross calorific value, ash content, moisture content, relaxed density and shatter index with respect to binder mass fraction, drying temperature and compaction pressure were developed.

The study concluded that the effect of z-binder volume fraction on the in-plane properties was minor.

The compaction pressure, drying temperature and binders weight fraction have been coded as x1, x2 and x3, respectively.

With regards to the interlaminar shear short beam test, they reported, in a single graph, the normalised interlaminar shear strength versus the z-binder volume fraction reported in previous studies.

Gerlach et al. (Gerlach et al. 2012) studied AI woven composites, with two different z-binder volume fractions 3 and 6%, subjected to quasi static (3 4 × 10−3 mm.s−1), medium (85 mm.s−1) and high (11,000 mm.s−1) strain rates.

The three influence parameters were (A) size of binder particles, (B) fraction of theophylline in solid particles and (C) fraction of microcrystalline wax in formulation.

The high density pressureless polyethylene powder was used as binder with mass fraction of 2.5, 5.0, and 7.5%.

It is shown that the fraction of binder can be reduced without a loss of tensile strength of the final tablets by size reduction of MCC.