Sentence examples for binary blends of the from inspiring English sources

Flotation results show significant antagonistic effects in binary blends of the Salene ore with the other ore types.

The crystallization kinetics in the miscible binary blends of the crystalline polymer and these inorganic nanoparticles were also determined through DSC and optical microscopy (OM) analyses.

When considering the polymerisation kinetics of binary blends of the monomers it was necessary to select the minimum number of kinetic parameters to obtain the best fits to the data.

Glass transition behaviour of binary blends of the imidized acrylic polymers with SAN systems indicated that miscible blends over a restricted range of AN content in the SAN could be obtained by limiting the imide and free-acid contents of the imidized acrylic polymers.

Further evidence of this was given by the trends in the ductile-brittle transition temperature of the various binary blends of these polyamides with SEBS-g-MA.

A model procedure has been proposed to predict the yield strength of binary blends of thermoplastics on the basis of the information on the continuity of phases acquired from the Hill model for the elastic properties of two-component systems.

As a result of this evaluation, a simple methodology was proposed for the mix design of the mortar phase in binary blends of powder with the aim of simultaneously obtaining both adequate flow properties and the necessary compressive strength of the mortar.

The compressive strength of the control mortar performed better than binary blends of FA and all ternary mortars whilst the flexural tensile strength of the control mortar was in general higher than all binary and ternary mortars for all curing ages.

Binary blends of biphenyl phthalonitrile and the n = 4 oligomeric phthalonitrile were prepared and characterized by differential scanning calorimetry and rheology studies.

Differential scanning calorimetry (DSC) shows that the formation of the self-organized nanophase in the thermosets caused that a part of poly(ɛ-caprolactone) subchains were demixed from epoxy matrix with the occurrence of curing reaction; the fractions of demixed PCL blocks were estimated according to the Tg-composition relation of the model binary blends of epoxy and PCL.

In addition, an analogous investigation was conducted by considering the effect of the blending ratio of binary blends of four real monoamines (methyldiethanolamine, monoethanolamine, diethanolamine, and aminomethylpropanol) to demonstrate the practicality of this approach.