This is because ITO films are fragile and have a big thickness (about 300 nm), which leads to a large tensile stress at the interface between ITO and ATA films in convex conditions.
According to parametric studies, it is concluded that with the decrease of radius of curvature, increase of the thickness of foam core and face sheets and decrease of blast intensity, the blast-resistance is increasing obviously; keeping the thickness summation of front and back face sheet almost constant, a big thickness of front face sheet will improve the blast-resistance performance.
We shall note that the γ-ray can penetrate and then inspect joints of bigger thickness than treated by X-ray.
Furthermore, the peak intensity changes with the growth temperature as shown in Figure 2. A relation between peak intensity and thickness is established; to bigger peak intensity, a bigger thickness.
The Loess Plateau in China is a region with the biggest thickness and most complicated topography of loess deposit in the world, where is affected by strong earthquakes frequently.
The addition of SiO2 colloidal particles to some hybrid formulation is thought to give films with bigger thickness than the coatings without particles, acting as mechanical reinforcement and to make an adequate surface to resist the extreme surgical procedures taking place in orthopaedic replacements.
From retrospective data about complications, we had noticed that patients with complication showed bigger thickness of the abdominal wall, internal organs fat area, and total fat area than those without complications.
Results obtained through the modified couple stress theory are indicative of the considerable effect of the size parameter, particularly in bigger thicknesses and shorter lengths of nanotubes, on the natural frequency.
The bigger the thickness is, the lower the solid matrix dimensionless temperature is, the higher the air dimensionless temperature is.
As shown in our results, we found that capillary ridge height increased with higher surface tension, steeper inclination angle, bigger initial thickness, and more Newtonian fluids.
Results showed that, when using the same parameter combination, FSLW joint using the reverse-threaded pin owned bigger effective sheet thickness (EST), bigger lap width and better lap shear failure strength.
