Sentence examples for between two adjacent electrodes from inspiring English sources

The numerical results demonstrate that the spatial sensitivity has a periodic distribution along the axial direction and its spatial periodicity is determined by the axial spacing between two adjacent electrodes.

We measured the DC current, I, resulting from application of a DC bias, V, between two adjacent electrodes.

In the inset, it is also seen that only one nanowire existed between two adjacent electrodes, and the contact between the nanowire and the electrodes seem to be very tight.

An array of 20 FTO electrodes, where each electrode has a width of 500 μm and a gap of 500 μm between two adjacent electrodes, was prepared using photolithography and a dry etching process.

Note that the middle VC between two adjacent electrodes is the only VC which can be created in present Nucleus CI devices, because they are equipped with only one current source.

Hence, straightforward calculation shows that the time-varying admittance (i.e. current/voltage ratio) of a segment between two adjacent electrodes, consists of an in-phase component: g ( t ) ′ = 1 R ( t ) = σ L A ( t ) + ε L dA ( t ) dt (1).

The resonant frequency of the generated SSAW mainly depends on the distance between two adjacent electrode fingers of the IDTs.

For parallel structure, almost all the bundles locate in the gap between the two adjacent electrodes, and it is uniformly distributed.

When a shock command is issued by the device, two adjacent electrodes act as a source for the current while the two opposite electrodes act as sinks.

Assuming that VCs are located exactly midway between two adjacent physical electrodes, the channel spacing for the Nucleus straight electrode array is about 0.38 mm.

The interdigitated electrode area is 1 mm × 1 mm and the distance between two adjacent interdigitated electrodes is 70 μm.