Sentence examples for between the subcell patterns from inspiring English sources

Subtle differences between the subcell patterns and phase development of the samples were observed.

The latter is based on a predictor corrector scheme that satisfies the fiber and matrix viscoelastic constitutive relations along with the micromechanical equations in the form of traction continuity and strain compatibility between the subcells.

The interfacial layers between the subcells in double junction organic devices are also discussed.

In this case the a parameter of the supercell is equal to, where a 0 is the value for the subcell, where there is no differentiation between cations, i.e. as shown in Fig. 1 ▶ (1).

The alternation may remain coherent over a long distance, making it visible in the X-ray diffraction pattern as a superstructure, representing a cell two or more times larger than the subcell that would be expected if the site was randomly occupied.

Furthermore, the p- and n-layer thicknesses, indium content, and position of depletion region of InGaN subcell should be adjusted to reapportion the light between the two subcells and to achieve the maximum conversion efficiency.

This is due to the dependence of the top- and bottom-subcell photocurrents on the subcell bandgap and thickness.

Different subcells can be connected by using a p++-n++ tunnel diode which bridges the p-shell of lower subcell and n-core of the subcell above.

Because MJ-SCs are typically in a series that connects each subcell, the total output current is limited by the subcell that generates the smallest photocurrent.

The cell is then divided into many subcells and an averaging is performed again by assuming uniform stress distribution in each subcell to obtain the effective stress/strain relations of the subcell.

The subcell of DMOC shows an orthorhombic perpendicular packing structure in the crystalline state.