Sentence examples for between the source electrode from inspiring English sources

The spacing between the source electrode and the drain electrode was 4 μm.

It should be noted that the ability of this device to sense is as a result of the location of SiNW between the source electrode and the drain electrode in the semiconductor channel (Table 2).

Moreover, the shorter source-gate distance in the multiple-gate ZnO MOSFETs could increase the electric field intensity along the ZnO channel between the source electrode and the gate electrode, in comparison with that of the single-gate ZnO MOSFETs.

Since the effective gate length of the multiple-gate structure was shorter than that of the single-gate structure, the series resistance between the source electrode and the drain electrode of the multiple-gate ZnO MOSFETs could be effectively reduced [22].

Figure 2a reports the C-V GS curves acquired in the same devices between the gate Schottky contact and the source electrode.

Open image in new window Scheme 9 The VG FET sensor is made by direct growth of VG between the drain and the source electrodes.

During the electrical transport measurements, the source electrodes were grounded.

Figure 3b shows electrical measurements made by applying a voltage between the drain–source electrodes and measuring the current flowing through the organic nanofibers/flakes grown on narrow (w = 200 nm) and wide (w = 2 μm) electrodes, respectively, with zero volts applied to the gate.

This implies that a large drain bias lowers the barrier between the MoS2 channel and the Au source electrode, thus weakening the channel controllability of the gate bias.

When the gate bias is below the threshold voltage, a small amount of electrons are diffused into the channel, due to large barrier between MoS2 and source electrode.

When the gate bias is smaller than the threshold voltage, a small amount of electrons are diffused into the channel, due to large barrier between MoS2 and source electrode.