Sentence examples for between the clad layer from inspiring English sources

Despite the rapid quenching accompanying LSC, none of the coatings developed/retained amorphous/glassy cladding possibly due to large-scale solute redistribution in the clad zone and/or between the clad layer and substrate.

The normalizing process not only increased the bonding strength between the clad layer and the matrix, but also improved the wear performance of the clad layer under all cladding conditions.

The interface between the clad layer and the substrate has good metallurgical bond.

The interface between the clad layer and the substrate has a good metallurgical bonding.

Additionally, the bonding strength between the clad layer and the matrix with different compositions was also evaluated.

The microstructure of the interface between the clad layer and the substrate is martensite, which shows that there is good metallurgical bonding.

It was found that incorporating a long idle time between each laser clad track produced a mostly tempered martensitic structure in the clad layer resulting in ductility of 17.4% when compared to a deposit without in-situ quench and tempering control of 2.7%.

According to the analyzed results, the microstructure of the clad layer consists of hypoeutectic structure, and undissolved tungsten carbides dispersed in the matrix of the Co-based alloy.

Laser cladding of NiCrBSiC powders on Ti 6Al 4V alloy substrate was carried out, and the microstructure of the laser clad layer was characterized by TEM and SEM.

Therefore, the wear performance of the NiCrAlCoMo clad layer greatly exceeds that of the NiCrAlCoCu clad layer.

Results show that the laser clad layer is divided into three regions: the clad, the dilution and the heat-affected zones.