Sentence examples for between the average pore from inspiring English sources

It is noted that the relationship between the average pore radius and permeability is stronger than that between the average pore radius and porosity from Fig. 4.

It was found that the ratio between the average pore size of soil (¯¯¯¯¯D0) and the particle size for which 85% by weight of particles in the slurry (d85) may be used to classify the types of filter cake formation.

A strong correlation was found between the average pore size of the starting material and the enzymatic conversion yield.

Investigating the relationship between the average pore size and the hydrolysability of the substrates showed that conversion yield increased with increasing pore size of the substrate.

A crude model was adapted to predict qualitatively the relationship between the tortuosity and the average pore diameter.

Results showed an exponential relationship between the permeability and the average pore size of the scaffolds.

Typically, the following properties were determined by BET and X-ray diffraction for CFC samples formed under both solar and laboratory experimental conditions: the surface area is about 50 170 m2/g, the pore volume is in the range of 0.4 0.8 cm3/g, the micropore volume is between 0.002 and 0.008 cm3/g, and the average pore diameter ranges between 10 and 40 nm.

Through changing the conditions in each experiment, the average pore diameter changed between 3.75 and 12.2 μm.

Despite differences between materials, scanning electron micrographs revealed that the average pore and interconnect diameter were not affected by the redox initiator concentration for most materials.

The application of hot water droplets significantly improved the exchange rate between the solvent and non-solvent phases, which increased the average pore diameter.

The average pore diameter of the samples lies between 20 28 nm.