Sentence examples for between sensor and surface from inspiring English sources

This pattern is later analysed and the distance between sensor and surface is calculated.

The round-trip time of the laser from the sensor to surface determines the distance between sensor and surface because of the constant speed of light.

In order to enhance the surface interaction between sensor and target, we have fabricated the waveguide as a freestanding structure.

Table 4 Range of motion of joints and admitted incident angle between sensor surface and laser beam Joint i Range of motion Incident angle (boldsymbol{q^{mathrm{lo}}}) ( (boldsymbol^{circ}}) ) (boldsymbol{q^{mathrm{up}}}) ( (boldsymbol^{circ}}) ) 1 −82 82 β ≥ 30∘ 2 −77 31 3 −13 154 −347 347 5 −87 87 6 6 −347 347.

When the object passes between the sensor and reflective surface, a large drop will be observed in the output signal.

In order to improve the accuracy of detection of flaws in wire ropes by magnetic flux leakage (MFL), the effect of the distance between a sensor and the surface of a wire rope (i.e., lift-off) on detection by magnetic flux leakage was investigated.

"We know of course that our spatial resolution is limited by the distance between the sensor and the surface, so we can only say something about magnetisation for scales of one metre or larger," explained Hans-Ulrich Auster, who leads the Romap instrument on Philae.

Carefully controlling the distance between the sensor and the surface is a prerequisite for effectively applying the set-up sketched in Figure 2. Figure 2 Sketch showing basics of a set-up relevant for performing non-destructive surface analysis using Optically Stimulated Electron Emission (OSEE).

Electrochemical techniques have proven particularly useful: employing different types of carbon- and metal-based electrodes for the fabrication of biosensors, the continuing challenge was to optimize the conductive properties of these devices by creating biocompatible interfaces for transferring electrons between sensor surfaces and redox proteins.

The thermal conductivities of CNT films, as well as the contact resistance between the sensor and sample surfaces, are extracted numerically by a finite-element thermal model.

Also the detection work itself requires no physical contact between sensors and subjects.