Sentence examples for between load and wire from inspiring English sources

Given the relatively linear relationship observed between load and wire deformation, it is likely that by determining the load deformation ratio (rigidity) of the wires at different time points, progressive stiffening of the system would be observable by this method despite loading of the limb changing between measurements.

The relationship between applied load and wire deflection was reproducible; this remained the case when testing wires with different pretensions.

Because of the increasing stiffness, there is a nonlinearity between the applied load and the wire transverse deflection [19].

The following conditions were clarified: non-slippage at the fastening between gripper and wire, a longitudinally uniform elongation, negligible cross-head bending, and the stroke calculation accuracy of elongated length by the initial load.

This explains why there is a spark between the helicopter and wire but no spark between the plates (helicopter and ground or another high wire).

Generally, anything involving plumbing, lifting heavy loads, electrical and wiring should be done by a professional.

Rod and wire technologies are of ancient origin, although some distinction must be made between wire making and wire drawing.

Fig. 7 Relationship between kerf width and wire tension, wire running speed, flow rate and servo voltage.

Peaker plants operate only to make up the difference between base load and peak load.

The compressive creep behavior is sensitive to the geometry of the woven structures: fewer wires perpendicular to the load and fewer bonds between wires cause lower creep resistance of the woven structure, due to a reduction in load transfer from the longitudinal wires (which are primarily load-bearing) and the perpendicular wires.

Various friction forces degrade efficiency: between the shaft and pulley, between the pulley and wires due to the stretching of the wire, and between the wire strands.