Sentence examples for between coating and surface from inspiring English sources
The bonding strength between coating and surface seems to be the weakest point (Walter et al. 1997).
To guarantee the adhesion between coating and the surface of stainless steel wires, micro-wave induced plasma was applied to modify the stainless steel wires.
An intermediate layer between coating and sample surface was formed by metal ion implantation using a high-current vacuum ion-beam and plasma source "Raduga-5".
However, correlation between coating parameters and surface microstructure and properties allowed determination of the optimum conditions that ensured fine grained uniform microstructure with a significant improvement in hardness and wear resistance.
Furthermore the adhesion behavior between coating and plastic melt is influenced by the pulse parameters via the changed chemical composition of the reaction layer on the coating surface.
The wettability characteristics, the advancing and receding contact angles between coating surface and ozocerite or crude oil were measured by the Wilhelmy plate method.
The work presented here showed that a roughened fibre surface increased the IFSS properties of a single fibre composite; however, the effect of coating parameters on the fibre surface (especially regarding the type of bonding between the coating and fibre surface) requires further investigation.
This is because adding TUA improves the physical barrier effect due to the denser coating compared to the regular ESol coating; in addition, it improves the adhesion between the coating and copper surface.
This paper proposes a design for an adaptive system by modeling the relationship between coating surface roughnesses and the controling factors in plasma spray coating processes.
Due to the presence of diffusion barrier(s) in between such MIP coating and electrode surface and the absence of a direct path for the conduction of electrons from the binding sites to the electrode, the development of electrochemical sensor is significantly restricted.
In parallel, we have found a shift (21 cm−1) of the Fe-O vibration band and was ascribed to the formation of a new band between the PEG coating and SPION surface [39].
