Sentence examples for between biosorbent and solution from inspiring English sources

During this stage, the solutions' pH (5.5), biosorbent mass (0.4 g), stirring speed (200 rpm), and contact time between biosorbent and solution (60 min) were kept constant.

The best contact time between biosorbents and Cd2+ solution is 60 min.

Contact time between biosorbent and adsorbate play a key role in influencing the biosorption process (Saleem et al. 2015).

Initial increase in removal efficiency up to 30 °C is usually due to the increase in collision frequency between biosorbent and adsorbate.

Studies on factors that interfere in the adsorption process between biosorbents and Cd2+ ions showed that the best conditions comprise solution's pH at 5.5, 8.0 g L−1 of biosorbent in the solution, and contact time 60 min.

The characteristics of the possible interactions between biosorbents and metal ions were also evaluated by scanning electron microscope (SEM) and Fourier transform infrared (FT-IR) spectroscopy analysis.

After each test, the solutions were filtered with quality filter paper (Unifil) to separate biosorbent and liquid solution.

This is due to the binding of almost all dye molecules to the biosorbent surface and the establishment of equilibrium between the dye molecules on the biosorbent and in the solution (Saha et al. 2010).

After the batch tests, the solutions were filtered with quality filter paper (Unifil) to separate the biosorbent and the liquid solution.

Solution pH is an important monitoring parameter influencing the sorption behavior of adsorbate onto biosorbent surface due to its impact on both the surface binding-sites of the biosorbent and the dye solution chemistry.

The Langmuir model parameters can be used to calculate the attraction between the biosorbent and adsorbate using dimensionless separation factor (R L).