Sentence examples for between adjacent elements is from inspiring English sources
The distance between adjacent elements is λ 0/2 (λ is wavelength) to avoid the aliasing.
We assume that the uniform linear array is used in the receiving end and the distance d between adjacent elements is equal to half the wavelength of signals.
Assume that the ULA is used in the receiving end and the distance d between adjacent elements is equal to (or less than) half of the wavelength of signals.
The average insertion loss was 19.5 dB at 50 MHz and the crosstalk between adjacent elements was about −35 dB.
The element size and separation between adjacent elements are chosen for operation at 7 MHz, a frequency typically used in tissue imaging.
After the transducer was attached to the electric connection board and packaged, the array transducer was tested in a pulse/echo arrangement, whereby the center frequency, bandwidth, two-way insertion loss (IL), and cross talk between adjacent elements were measured for each annulus.
In thinned array, elements would be arranged anywhere given the distance between adjacent elements was no less than a predefined value for reducing cross-coupling of adjacent elements.
As the materials of the elements of these bicomponent arrays are both metals, namely either Py/Co, Py/Fe, or Py/Ni, the elastic and density contrasts between adjacent elements are rather low.
Isolation between the adjacent elements is better than −37 dB with the load.
In other words, the structural theory of the plate element is a property of the FE node in this present approach, and the continuity between two adjacent elements is ensured by adopting the same kinematics at the interface nodes.
The sudden temperature change between two adjacent elements is realized in the FE calculation in that the two elements do not share a common node (otherwise the temperature change would be distributed in a ramp-shaped manner over both elements), but the degrees of freedom of both nodes at the same geometric location are coupled.
