Sentence examples for best mechanical performance from inspiring English sources
Experimental results demonstrated that a crash resistant adhesive provides the best mechanical performance under quasi-static and impact loads.
The films that exhibit the best mechanical performance are those grown along the (002) orientation and being denser and stoichiometric.
The existence of a correlation between metal surface temperature and tensile lap shear force was revealed, and the surface temperature resulting in the best mechanical performance was determined.
The results indicate that the cold mixture 8/12.5 with altered granite and cementitious grout with 30% milled glass presents the best mechanical performance.
Recently, Xu et al. raised this value to 2.2 GPa through a full-scale synergetic defect engineering method to minimize the possible defects at all levels ranging from atomic to macroscale, the best mechanical performance until now [89, 90, 91].
No significant change in hardness was observed in all combinations of tool and joint geometry and the best mechanical performance was obtained with the welds produced with the progressive tool in the T-butt configuration.
It is found that the folded core models with curved fold lines exhibit the best mechanical performances in compression and shear while the multiple layered models outperform the other folded core models in bending.
At the highest ion irradiation dose of this study, the strength and elastic modulus of DWCNT-epoxy composites approach ∼900 MPa and 25 GPa, respectively, which is among the best mechanical performances reported for randomly-oriented CNT mats.
The experimental mechanical property measurements and microstructural characterizations confirmed that the A356-0.54 wt.% Sc alloy exhibits the best comprehensive mechanical performance.
The results showed that the best conductivity and mechanical performance were obtained using Na2S2O4 as a reducing agent.
It was found that the coating containing 2.3 at.% of Si, corresponding to the solubility limit, exhibits the best mechanical and tribological performance: the wear rate of the SS410 substrate has been reduced by a factor of 500, corresponding to a hardness and wear coefficient of 25 GPa and 2 4 × 10− 7 mm3/N m, respectively.
