Sentence examples for bent using a from inspiring English sources
Park et al. [26] reported that the carbon nanotubes were bent using a FIB. Figure 3 SEM image of bent ZnO nanowires and result from iradina simulation.
Light can be bent using a medium; this is called refraction and this is what is used in lenses to focus light.
To make the gooseneck, a 21-foot pole that is 6 5/8 inches in diameter is bent using a roller that applies about 70 tons of pressure for about 15 minutes.
DIC was used to measure residual strains in 18 cold bent 12.7 mm thick ASTM A36 steel plates, bent using a press-brake to a constant radius of 102 mm with varying angles (10, 20, and 30 degrees) and plate widths (76.2 mm and 203 mm).
The ten trees were bent using a winch to 30 or 40% of the predicted failure load of the trees (Table 1).
The ten trees were bent using a winch to 30% of the predicted failure load of the trees (Table 1), to simulate strong winds, while staying within the elastic limits of the stem.
Channel opening follows a conserved mechanism of inner helix bending using a flexible glycine residue, the gating hinge, seen in MthK and most other tetrameric cation channels.
Micro-cantilevers are increasingly used to extract elastic and plastic material properties through controlled bending using a nanoindenter.
The main aim of this paper is to present a closed-form solution for the elastic buckling strength of unstiffened circular cylinders under pure bending using a new simplified energy approach employing the well-known Ritz method.
The one-way spanning two-leaf two-leaf230inal thickness) or three-leaf (350 mm nominal thickness) walls had variable heights fror 2000 mm to 4100 mm and were subjected to one-way out-of-plane bending using a system of airbags.
The production processes employed here may be of different kinds: Flat pieces are easily made by cutting them out from readily available panels; cylinder-shaped pieces have to be bent by a machine which is not cheap; truly freeform pieces have to be shaped by hot bending, using a mold which has to be specially made and which is far from cheap.
