The phrase "bent using" is correct and usable in written English.
You can use this phrase to express that an object has been manipulated or adjusted in some way. For example, "The tree branch had been bent using a lever."
Park et al. [26] reported that the carbon nanotubes were bent using a FIB. Figure 3 SEM image of bent ZnO nanowires and result from iradina simulation.
To make the gooseneck, a 21-foot pole that is 6 5/8 inches in diameter is bent using a roller that applies about 70 tons of pressure for about 15 minutes.
The ten trees were bent using a winch to 30 or 40% of the predicted failure load of the trees (Table 1).
The ten trees were bent using a winch to 30% of the predicted failure load of the trees (Table 1), to simulate strong winds, while staying within the elastic limits of the stem.
It has been proven that BSWs can be guided, reflected, refracted, focused, diffracted, coupled and bent using 2D optical components such as ridge waveguides, lenses, prisms, gratings, waveguide couplers and curved waveguides on top of the multilayer platform [13 18].
DIC was used to measure residual strains in 18 cold bent 12.7 mm thick ASTM A36 steel plates, bent using a press-brake to a constant radius of 102 mm with varying angles (10, 20, and 30 degrees) and plate widths (76.2 mm and 203 mm).
The supine posture with the knees and hips bent used during bridging exercises, is to most LBP patients a comfortable, pain-free posture.
If the clips are lost or bent, use strips of medical tape to secure the ends.
Moreover, compression tests were conducted using the IITRI test fixture, shear using Iosipescu fixture and bending using four-point fixture.
The TBT and the FEM were applied to analyze the profiles under bending, using material properties estimated by CLT.
A general simulation model is developed to study the dynamic process of roll plate bending using finite element method (FEM).
