Sentence examples for bending toughness from inspiring English sources
The study in the mechanical characterization of SG showed that after curing for 28 days, the bending toughness coefficient of the specimen increased as much as 53.7% with the incorporation of 0.6 wt% PAAS.
The obtained results show that the compressive strength, Young's modulus, modulus of rupture and tensile strength of the composites decrease with the deduction of the content of the fly ash and bagasse fibre, but the bending toughness and tensile ductility of the material increase with fly ash content and peak as fly ash to cement ratio achieves 2.0.
The experimental results show that the compressive strength, Young's modulus, modulus of rupture and tensile strength of the composites decrease with the reduction of the content of fly ash and bagasse fibre, but bending toughness of the material increases with fly ash content and peaks as fly ash to cement ratio achieves 2.0.
In particular, when the hIAPP amyloid fibril with its length of ~8 nm undergoes the bending deformation, the toughness of the fibril is evaluated as ~10 kcal mol−1 nm−3 [23], which is larger than the toughness of the fibril when it is pulled along the fibril axis.
High performance ceramics which exhibit high hardness, bending strength and toughness show the perfect combination of properties for these applications.
High energy density piezoelectric ceramics, 0.8[Pb(Zr0.52Ti0.48)O3]–0.2[Pb(Zn1/3Nb2/3)O3 + 2 mol%MnO2 (PZZNT), were synthesized and their mechanical behavior was investigated by conducting tensile, bending and fracture toughness tests.
Results show that the apparent toughness, bending strength and work of fracture of the optimal Al2O3/Mo-Al2O3 Al2O3/Mo-Al2O3rialaminatedreach 8.1 materials 634 MPa and 330 J m−2.
Advantages such as sensibility in bending, high fracture toughness, and high sensibility in strain enable the application of polymer optical fibers as sensors for strain, temperature, level, and for angle measurements.
In this study, ZrO2/AISI316L functionally graded materials (FGMs) were fabricated for use in joint prostheses and their mechanical and biotribological properties were evaluated through fracture toughness, bending strength, and wear resistance studies.
