Sentence examples for bending tests were applied from inspiring English sources

Three point bending tests were applied for the infiltrated metal-matrix composites (MMCs).

Compression, split tensile and notched bending tests were applied to three samples from each mix with simultaneous electrical resistance measurements.

Bending tests were applied to two groups of gears cut by hobbing and gear shaving from gear blanks.

Thermogravimetric analysis (TG) was employed to assess fiber distribution profiles and four-point bending tests were applied to evaluate the mechanical performance of both conventional and graded composites.

Three point bending tests were applied on beam specimens with a single size but different notch size to obtain the boundary effect model based fracture energy.

A procedure that simultaneously yields the flexural and the shear modulus of GFRP pultruded profiles directly from 3-point bending tests is applied.

Lastly, four-point bending test was applied to five types of GFRP/steel reinforced concrete beams to investigate the mechanical responses of the beams until failure.

In order to test the mechanical properties (stiffness, ultimate load and Young's modulus) of compact bone a three point bending test was applied to tibial shafts (Fig. 3A).

Next, monotonic and cyclic cantilever bending tests were both applied to validate the results of the finite element analyses.

The inverse parameter identification technique using a modified Iosipescu shear test and three-point bend test was applied in the current study.

Four-point bending tests were conducted.