Sentence examples for bending test of a from inspiring English sources

Open image in new window Fig. 3 Three-point bending test of a notched concrete beam: test set-up.

In order to show the workability of this failure criterion, finite element simulations of coupon tests and of a three-point bending test of a textile composite are shown and compared to experimental data.

The size effect fracture energy (G f ) and the true fracture energy (G F ) can be found from a three point bending test of a notched concrete beam (Maturana et al. 1990; Guinea et al. 1994; Planas et al. 1999; Kitsutaka et al. 1998; Elices et al. 2002; RILEM 2007; ACI 446 2009).

It was suggested by three-point bending tests of a round notched bar under plane-strain conditions that the toughness of PP depends on the strength of the fibrils of the craze, the density of voids or microcrazes and the yield stress.

A three-point bending test of the femur was performed using a microcomputer-controlled electrical universal testing machine (HY-1080; Hengyi Instrument, Shanghai, China) at a crosshead speed of 1 mm·min−1.

A conventional bending test of three- or four-point bending is not necessarily suitable because a high stress concentration due to a loading device takes place.

In addition, the fracture toughness of the BMG was also studied by three-point bending test of pre-cracked samples, which yields a high KJ value of 116.7 MPa√m.

Figure 3a illustrates a schematic image for the bending test of the prepared hybrid electrodes.

Fig. 2 Flexure bending test of strengthening reinforced concrete corbel.

The 3-point bending test of composite beams has been conducted experimentally and simulated numerically.

In 2002, the final recommendation for the bending test of steel fibre reinforced concrete was presented by the RILEM TC162-TDF Committee.