Sentence examples for bend tests were performed from inspiring English sources
Microindentation and bend tests were performed on the infiltrated material to evaluate its mechanical properties.
Three point bend tests were performed to reveal the fracture strength of the aluminum composites.
Cyclic tension and bend tests were performed on heat-resistant 12Cr1MoV steel specimens in as-supplied condition as well as after Zr+ ion beam surface irradiation.
Three-point bend tests were performed on centre-notched beams to determine the tension softening curve (TSC), Mode-I fracture toughness KIC and the fracture energy GF.
In-situ 3-point bend tests were performed on GE and CNT-GE composites at −80 °C, −40 °C, room temperature (20 °C), 70 °C and 110 °C temperatures at 1 mm/min crosshead speed.
Bend fracture specimens were cut from the laminate plates in divider orientation, and bend tests were performed to study the fracture behavior of CFR-MIL composites under three-point and four-point bending loading conditions.
Additionally, three-point bending tests were performed to assess shear performance.
Uniaxial compression and three point bending tests were performed for assessing the mechanical and ecological performances of the two mixtures, containing or not plastic fibers.
In order to assess the structural performance enhancement of the new hybrid system, four point bending tests were performed on two different sizes of RC slabs.
