Sentence examples for bend section from inspiring English sources

A network of Capacitive Beam Probes (C-probes) was also enabled for beam position monitoring throughout the bend section.

The thermal conductivity is much sensitive to the change of the smaller heights and longitudinal lengths of the bend section; and the thermal conductivity decreases with the increasing of the temperature first, then increases after it reaches a minimum.

Based on our results, the pull-out behaviour of arch-type steel fibre was classified into three pull-out stages: debonding and pull-out initiation, achievement of maximum pull-out load while passing through the bend section, and the final pull-out stage as the fibre passed through the arch.

We test this method along three segments of the San Andreas Fault (Southern section near Salton Sea, Creeping section near Parkfield and Mojave/Big Bend section near Los Angeles), and find improvements of 26%, 11 % and 8 in these areas, respectively.

Realize though, that water can be deeper and swifter at bend sections, so always look for the best 'run off' section of a river that will carry you to a safe point and not into danger if you lose your footing.

Fourth, the length of the distal bending section is shorter with a proximal bending section, thus the multi-bending cholangioscope facilitates insertion into the bile duct.

In his redesigned unit, a basket under the plug collects larger pieces of food, meaning only liquid gets into the U-bend section, where another two filters separate the oil from the water.

The best part of the circuit is probably the S-bend section at the end of the back straight: it's super-fast and requires real precision to get it just right.

The idea is to employ an active constraint to control the length of the bending section and use the wires to control the curvature of the bending section.

Though, the workspace and dexterity of these designs are limited due to the lack of control in either the length of the bending section or the curvature of the bending section at the distal end.

Besides, the growth at the P2DT 180° bending section is considered a significant issue because of the unexpected achromatic effect.