Sentence examples for bench scale data from inspiring English sources

The good performances of the models by Maier et al. resulted from small number of bench scale data.

However, the model derived from bench scale data is generally unable to account for the simultaneous change in key process parameters, and often fail when applied to real WTP (Baxter et al. 1999).

EERC bench-scale data clearly show that the type of fly ash is important in determining mercury speciation in flue gas streams.

Together with PGMs, the characterisation of chromite floatability and prediction of recovery and concentrate grade in a production plant using bench-scale data is therefore a key component of UG2 ore analysis.

Analyses of extensive bench-scale data (n = 208) from within the University of Adelaide's Food Technology Research Group for Escherichia coli have been used to assess the adequacy of four appropriate kinetic model forms for the rate coefficient for thermal inactivation (k) as effected by combined Tand pH.

In the control cases modeled with bench-scale data from different varieties of corn stover feedstock, a higher proportion of xylose oligomers and a lower proportion of degradation products resulted from the low severity pretreatments.

The model provides good predicting accuracy on the overall heat transfer coefficient from the bench scale facility as well as data from the field test by correlating 95% of the measured data within ± 20%.

This processing model is validated using experimental data from the bench scale unit.

Data from supporting bench scale tests were used to estimate contaminant-carrier binding coefficients and to simulate two-site sorption of the carrier to the aquifer sand.

The consideration of thermal characteristics in reactor scale-up involves the concept of utilizing data from a bench scale or a pilot plant reactor to design a full size commercial reactor that has the capability to remove/add heat to maintain the temperature control.

The impact of a range of operating and cleaning factors on operating cost variation was computed using algorithms describing operational and cleaning factor relationships with permeability recovery data measured from bench scale tests on fibres sampled from full-scale operational plants.