Your English writing platform
Discover LudwigSuggestions(2)
Exact(2)
Furthermore, the strain levels in the composite shell were well below the materials allowables set based on damage tolerance requirements.
At a malrotation angle of 15°, the FP geometry shows large deformations in the posterolateral region and a 40% higher maximum stress value compared to the RPS system which is still slightly below the materials yield strength (FP = 32 MPa versus RPS = 23 MPa).
Similar(58)
In this process, the spring is heated uniformly below the material transformation temperature.
It can be shown that maximum temperatures of claddings and fuel are well below the material limits.
The objective was to produce a part with minimum thickness variation while keeping the maximum effective stress below the material ultimate stress during the forming process.
Highest stress, at the first inner edge of the serpentine beam from both the anchors, from seismic excitation is way below the material strength limit.
The highest stress of 1.1 MPa, which is way below the material strength limit of sensing element, occurs at the first inner edge of the serpentine beam from both the anchors.
The stress and displacement fields, due to the heating induced by the neutron flux, have been computed with the aim to check if the stress remains below the material's allowable values and the induced displacement field leads to an acceptable deformation of the surface where the lithium flows, so that no flux instabilities are induced in the lithium jet.
The inference technique is explained below in the Materials and Methods section.
This was performed by calculating the unbiased effective free energy landscapes of the local degrees of freedom, as described below in the Materials and Methods.
It carries 80 cannons, on deck and almost invisible below deck, and the materials are traditional oak and hardwood, brass, twine and canvas.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com