Sentence examples for below the depth of from inspiring English sources

They hence are well-developed soils rather than undeveloped "A C" soils, with an illuvial layer below the depth of consideration.

Based upon X-ray diffraction and bulk elemental data, loss of Fe commences as clay begins to weather ∼15 cm below the depth of auger-refusal.

Only the 25% of the earthquakes occur instead below the depth of 2000 m, possibly suggesting a progressive transition from brittle to plastic behavior of the rocks associated with very high temperatures9.

The most promising storage containers are called deep saline aquifers rock formations one to three kilometers underground, below the depth of freshwater aquifers, and beneath a layer of impermeable rock called the caprock, which acts as a seal.

During all applications, subsurface seepage losses occurred, but these would not be lost to the watercourse when applied in quantities respecting irrigation guidelines and on soils where the groundwater table was at or below the depth of the subsurface drains.

the depth of which was increased, by means of drilling on or after February 19 , 1977 to a completion location which is located at least 1,000 feet below the depth of the deepest completion location of such well attained before February 19 , 1977

For each sequence, excluding the reference strain, a base was considered unresolved ('N') if either the phred consensus quality score was below 30 or the depth of coverage in the alignment was below 15 ×.

The new study, the first to measure California's groundwater below 300 meters (the depth of a typical well), has inspired both skepticism and cautious support among the state's scientists.

Compare them to the descriptions below and shift the depth of your voice a little bit closer to theirs.

The aquifers of this group occur at 2 3 m bgl (below ground level) within the depth of 45 m bgl and comprise sand, silt and clayey sand.

Fatigue crack initiation areas (at the specimen's surface or below) are predicted depending on the depth of the hardened material layer.