Sentence examples for behaviour of the coating from inspiring English sources

Hydrogenated amorphous carbon (a-C H) coa-C Hs coatingssubstantial residual stresses whicontainicularly influence the failure behaviour of the coating substantial

Furthermore, the corrosion behaviour of the coating was discussed.

Model predictions can be improved by considering the through-thickness fracture behaviour of the coating.

This model takes into account the elastic properties of the spheres and the elastic then elastoplastic behaviour of the coating.

The effects of coarse WC particles on the microstructure, mechanical properties and wear behaviour of the coating were investigated.

This model takes into account the elastic properties of the cylinders and the elastic then elastoplastic behaviour of the coating.

The dry sliding wear behaviours of the coating were investigated at room temperature against Si3N4 ceramic balls at room temperature under applied loads ranging from 2.3 N to 5.3 N using a ball-on-disc tribometer.

Especially, the thermal behaviour of this coating is induced by the void shapes and networks which are in turn determined by both the spraying conditions and the feedstock material.

Investigations on the behaviour of this coating subjected to high-temperature oxidation in air and oxidation erosion in actual boiler environment at 700 ± 10 °C under cyclic conditions have been carried out.

The deduction of n-PEC ini needs the information on experimental physico-chemical characteristics as well as preliminary data on environmental behaviour of the ENMs, i.e. information on the agglomeration behaviour, stability of the coating, and alteration of the ENMs, e.g. by oxidation or dissolution.

While the erosion behaviour of the NiCoCrAlY coating was evidently ductile, the dispersion strengthened coating showed mixed erosion behaviour and a higher erosion rate.