Sentence examples for behaviour has been evaluated from inspiring English sources
The mechanical behaviour has been evaluated in terms of cold crushing strength (CCS) at room temperature and three point bending modulus of rupture (MOR) at 25 and 1260 °C.
Their behaviour has been evaluated on the basis of several parameters, namely: the in-section arrangement of hoops, the effective confinement ratio, the spacing of hoops normalized to the longitudinal bar diameter, etc.
The influence of environment and fatigue waveform shape on crack growth behaviour has been evaluated in a workhorse turbine disc material, Inconel 718, at 600°C through an experimental programme that investigated crack growth from a notch geometry.
The catalytic behaviour has been evaluated by choosing two transesterification processes: a simple model such as the reaction between ethyl butyrate and methanol and the production of biodiesel from sunflower oil and methanol.
New composites of carbon with different metal compounds (tin, iron, nickel and vanadium oxides and sulfides) have been obtained at low temperature from petroleum residua, and their electrochemical behaviour has been evaluated in lithium test cells.
To this purpose aliquots of Cu-NPs mixed to four types of commercially available consolidant/water-repellent products have been applied to different stone and plaster surfaces located in the archaeological area of Fiesole, and their behaviour has been evaluated for more than two years, showing appreciable performances [8].
The mechanisms responsible for the observed behaviour have been evaluated using transmission electron microscopy, which revealed a range of different defects that formed during load cycling.
The corrosion behaviour of steel has been evaluated through anodic polarization study by conducting potentiodynamic linear sweep test on bare steel specimens immersed in electrolytic concrete powder solutions contaminated with different concentrations of chloride and sulfate ions.
To date, the hydrodynamic behaviour of the cannulae has been evaluated comparing their pressure loss flow rate relationships, as obtained from in vitro experiments using a monodimensional approach; this methodology neither furnish information about the local fluid dynamics nor the established flow field in specific clinical work conditions.
The effect of these precipitate characteristics on the prismatic-slip-dominated deformation behaviour of the above alloy has been evaluated.
