Your English writing platform
Discover LudwigSuggestions(1)
Exact(7)
The design parameters studied were the column diameter (150 mm and 200 mm), the included angle of the conical base, γ (60° or 40°) and the presence or absence of a Venturi inserted before the inlet air orifice.
The results show that if the extraction steam to be replaced is located before the inlet side of reheated steam, using Method I would bring much calculation error in the main parameters of solar aided power generation (SAPG) system.
0.03 MPa of hydrogen pressures established in the reactor before the inlet of ethylene can greatly improve the catalytic activities.
The initial system for the Si wire growth before the inlet flow of active gas mixture is the catalytic gold droplet array on the surface of Si substrate.
The separation was achieved using a Luna RP-C18 column (250 × 4.6 mm, 5 μm), (phenomenex, USA) protected with a guard column (Phenomenex, USA) fitted just before the inlet junction of the analytical column.
BC was measured using an aethalometer (Magee Scientific, Berkeley, CA), and PM2.5 was measured using a tapered element oscillating microbalance (model 1400A; Rupprecht & Pataschnick Co., East Greenbush, NY), operated at 50°C with two 4-L/min PM2.5 impactors before the inlet.
Similar(53)
The three routes continue northeast through the town, intersecting NY 327 and NY 13A before crossing over the inlet of Cayuga Lake and entering the city of Ithaca on Meadow Street.
Then 40 hr before analysis, the inlets with the transfected cells were transferred to mWnt3a-producing cells (ATCC, Manassas, VA, USA: CRL-2647) seeded in 500 μl DMEM supplemented with 10% FCS in 12-well plates.
Complex inlet piping is only effective if the piping is at least one or two pipe sizes larger than the SRV inlet and its size is reduced just before the SRV inlet.
Follow the path up and around the inlet before dropping down to the stream at the valley floor.
Three different concentrations of 0.2, 0.5 and 0.8 mol/L of each reactant at the inlet before mixing and 10 different flow rates from 1.60 × 10−9 m3/s to 16.0 × 10−9 m3/s are studied.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com