Sentence examples for before breakage from inspiring English sources
This dependence supports the requirement of complete stretching of the polymer chain before breakage.
The maximum pressure drop the microvalve can sustain before breakage of the hydrogel is 21 kPa and 16 kPa for temperature-sensitive and (pH/glucose -sensitive hydrogels, respH/glucose -sensitive
The increase in molecular weight was found to enhance the overall mechanical properties such as the load to induce the mesophase and the ultimate tensile strength before breakage.
A mechanism is proposed for this non-random fracture, from which it can be concluded that complete stretching of the polymer chains is required before breakage can occur.
It was observed that the size of the bubbles arriving into the impeller region in the absence of particles before breakage was considerably higher than the size of the clusters formed at the same impeller speed.
Whilst the point profile of the grub screw secures a better hold of the half pin when the torque used is equal, the driver used to insert the grub screw is limited in delivery of a high maximum torque before breakage; this appears to be the limiting factor for the security of hold on the half pin by grub screws.
Upon breaking a bar the estimated rotor resistance is increased instantly, thus providing two values of resistance after and before bar breakage.
In this study, 2 cases in Group 1 and 3 cases in Group 2 were diagnosed with pseudoarthrosis and underwent repeat surgery; this was according to the condition of the bone union based on the loss of pain before surgery, breakage of the pedicle screw, radiolucency around the pedicle screw, and abnormal motion on flexion and extension radiograph [ 20].
It is also found that some of the velocity seismograms at PKIN were saturated due to the limited dynamic range of the sensor and some breakage occurs before and after P- or S-phase onset in some components.
A three point flexural test demonstrated a displacement of 0.8 mm before array's breakage.
The best simulation technique identified in this study predicts that the ultimate tensile strain of a carbon nanotube is around 40% before atomic bond breakage.
