Seventeen parameters were studied through experimental designs and led to an acceptable production.
Since, the bonding temperature is the most important parameter to achieve sound joint with good mechanical properties, its influence is studied through experimental trials.
In this paper, the possibility of substituting the external shades with an internal ones using high reflectivity materials was studied through experimental tests and simulation validations.
Suitable reactors with significant parameters and conditions were studied through experimental design, and novel esterification processes were suggested; among others, the continuous removal of the produced water was provided.
In this research, the flexural behaviour of composite girders under non-monotonic service loads and the bending capacity of composite girders with Class 3 section were studied through experimental work.
In this work, the single and successive spherical indentation of coated systems was studied through experimental and finite element method (FEM) analyses, with emphasis on the causes of the contact stresses at the indentation edge.
Once mature miRNA sequences have been identified, their expression in different tissues, developmental stages or environmental conditions can be studied through experimental approaches such as northern blotting, oligonucleotide arrays or deep-sequencing of isolated small RNA fractions.
37, 38 These factors have been studied through both experimental (mutagenesis study) and computational methods.
The optimum contact time and absorbent dose were found to be 120 min and 3gm/L, respectively.Langmuir, Freundlich and Temkin isotherm are studied through this experimental data and found to be well followed.
In this paper, the structural behavior of corrosion-damaged columns with reinforcement details representative of pre-1980s Cofes of practice was studied through an experimental program comprising 21 prismatic specimens.
