Composite parts have been increasingly used in aircraft industry because of their high strength-to-weight ratio and stiffness-to-weight ratio.
In contrast, even when using a DLC-film-coated tip, the precise nanometer-scale processing of HOPG was impossible because of the high strength of its basal plane.
In the aged parallel-type Cu Ni Zn/Cu Cr composite (with the loading axis parallel to the interface), strain accommodation across the interface was difficult because of the high strength of aged Cu Cr and interface debonding occurred as the lateral stress developed across the interface with strain.
Because of the high strengths exhibited by their primary chemical bonds, many ceramics possess unusually good combinations of high melting point and chemical inertness.
This is possible because of the high strength-to-weight ratio and in-plane stiffness of the CLT panels, and the capacity of connections to resist the loads with ductile deformations and limited impairment of strength.
However, because of the asymmetry and the high strength of the nonlinearity of Equation (1.3), it is more difficult to estimate the norm of u, ρ, u x, ρ x in Sobolev space.
Because the higher strength of coke enabled it to support a bigger charge, much larger furnaces became possible, and weekly outputs of 5 to 10 tons of pig iron were achieved.
Moreover, the approved dosage of FP/S in COPD patients is 500 μg/50 μg twice daily in the EU [ 37], while in the US only a lower dose (250 μg/50 μg twice daily) was approved on the basis of clinical trial results [ 38- 40], and importantly because an efficacy advantage of the higher strength had not been demonstrated [ 41].
Mass removal rates and removal rate constants were much higher than reported in other studies probably because of the high-strength wastewater, the high loading rates and the tropical conditions.
This is partly because the high-strength aluminum alloys used in the aircraft industry are sensitive to the high welding temperatures.
Ceramics is widely used material in engineering practice because of its great strength, high heat resistance and low density.
