Sentence examples for because the flow rate from inspiring English sources

He said it did not particularly matter where the gauge was located in the weir pool, provided it was calibrated correctly because the flow rate in the entire weir pool would be the same.

A quantitative evaluation shows that the poloidal flow direction is preferred, because the flow rate and pumping power are about an order of magnitude smaller compared to the toroidal flow direction.

As a result, it was shown that a grain size of #220 is suitable, because the flow rate through pores is large and all the short pins can be uniformly formed on the chuck surface.

Because the flow rate defines tracer delivery to the tissue, this might complicate interpretation of semi-quantitative results where the bolus input is not accounted for.

Because the flow rate varies rapidly near injectors and significantly changes the polymer viscosity due to the non-Newtonian rheological behavior, the polymer viscosity near the wellbore is difficult to estimate accurately with the practical gridblock size in reservoir simulation.

However, we were able to estimate that the flow was stabilized, because the flow rate of the right VAD was stable, and there was no significant change in both ventricles and septa, as shown on transesophageal echocardiography.

This is because as the flow rate of oxygen increases, ITO thin films are better and more efficiently crystallized and as the thin film structures become more crystalline, it is more prone to have a relatively smaller band gap.

Because of the flow rate dependency of the ESI process, ion source specific parameters were readjusted.

This cap, says the company, is now collecting more than 10,000 barrels of oil a day, ferrying it up to a tanker on the surface.That sounds like good news, because the current official estimate of the flow rate, from the National Incident Command's Flow Rate Technical Group, is between 12,000 and 19,000 barrels a day.

Although the stable component cannot be completely corrected because its variation is nonlinear with the flow rate and drop in density, and the fluctuating component can only be reduced to a certain extent due to the real-time processing limitation of the instrument, CMF can provide relatively reliable measurement results of the liquid mass flow rate when the gas-liquid two-phase flow occurs.

"If the flow rate is sufficiently high, such that the momentum kill doesn't work, that also suggests the flow rate is sufficiently high because there's not a lot of obstructions in the blowout preventer," Wilson said.