Sentence examples for because of the bending from inspiring English sources

In the case of 3D modeling of thick reinforcements, the use of generalized continuum mechanics model is necessary because of the bending stiffness of each fiber and the slippage between fibers.

The volume shrinkage and curl distortion of the resin during photo-polymerization are the main reasons for the poor accuracy of the built prototype, especially when the part is hollow, in which case the bending is greater because of the bending stress and cannot be compensated for.

The components under investigation are clamped joints made of aluminium alloy and used in front motorbike suspensions to connect steering plates and legs, or legs and the wheel pin: static failures of clamps occurred during the tightening, because of the bending stress introduced by the preloading forces.

Thus, the deeper SMGA has a slightly steeper dip angle because of the bending of the subducting Pacific slab.

Important scale-up factor is the thickness of the biosealing layer which has to be sufficiently mechanically strong to prevent cracking because of the bending from hydraulic head and/or thermal expansion.

In principle, the term ΔG0,i could also depend on L because of the bending contribution [14] but the in vivo results [10] indicate that it is practically constant for the range of lengths analyzed.

Nevertheless, this approach has not led to wide use of these aberration correctors, partly because aberrations of the bending magnet can be a serious problem.

Applying the simple beam theory to such a beam results in a noticeable error in certain cases, because of overestimation of the bending stiffness at the discontinuity of the cross-section.

The ultrathin flexible transparent QLEDs showed highly stable EL during 1000 cycles of the bending test because the designed ETL layer did not increase the overall thickness of the QLEDs, and fragile ITO electrodes were located in the pseudo-neutral mechanical plain.

Note that I is independent of the bending direction because of the rotational symmetry of the cross section.

The important of this application might be contributed to the pollution reduction innovation of mechanical part designs in field of green energy, because the bending type magnetostrictive actuator can self-deform to produce stroke length with suitable actuation control in the future.