Sentence examples for beam zone from inspiring English sources

Two major failure mechanisms were observed: flexural failure in the central beam zone combined with plastic yielding of the reinforcement and the diagonal shear crack failure in external shear zones.

When such stars transition to supernovae, they may emit intense beams of gamma rays, and if Earth were to lie in the beam zone, devastating effects may occur.

Test variables included the type of stirrups (open and closed) and the stirrup spacing in the beam connection zone.

We used an ultrasound image field depth of 4 cm and a single ultrasound beam focal zone that was focused on the thoracolumbar fascia.

In both cases the CFRP plates were embedded into small grooves at the beams tensile zone.

The parameters varied among the specimens were the T flange thickness, the type of weld between the T flange and the stem (fillet weld or full penetration groove weld), and the column web thickness, in order to observe the most significant limit states of the connection, namely development of plastic hinges in beams, panel zone plastification, and T flange prying.

The considered cast modular joint was an integral assembly of joint zone, beam linking zone, and column linking zone, and the joint geometry was carefully designed to overcome some fracture-related issues that conventional joints may have.

Surprisingly, the brittle separation of the FRP which defined failure of the FRPRC frame started in the beam's midspan zone without evidence of local yield.

Analytical results using the developed model were compared with experimental data from full-scale moment connection tests including global load versus displacement and local response of beam hinge, panel zone and other components.

As suggested by the selected area electron diffraction (SAED) pattern (Figure2c, inset), which was taken with electron beam along [001] zone axis, perpendicular to the surface of this nanosheet, it reveals the well-crystallized nature and the hexagonal structure characteristic of the exfoliated products.

Analytical models of connections are employed including panel zone and beam to column joint model.